Mr. Plow - Snowex Salt Spreaders

Vee Pro 6000 & Vee Pro 8000
Snowex Vee Pro 6000

SnowEx, a division of TrynEx, has introduced the
New Vee Pro 6000 & 8000 salt and sand spreader.
Designed primarily for bulk material spreading, the
unit's hopper is constructed entirely of heavy-duty
polyethylene.

The Vee Pro's polymer construction is designed to
offer numerous advantages over traditional steel
butyl V-boxes. It is designed to eliminate corrosion
and constant maintenance commonly associated
with steel alternatives. The lightweight Vee Pro can
be easily installed or removed by two people, freeing
the vehicle to perform multiple applications. It is
designed to fit both short and standard truck beds.
This versatility maximizes the unit's rental capabilities.”

Operational	Vee Pro 8ft SP-6000	Vee Pro 8ft SP-8000
Capacity.......................	1.0 cubic yard	1.5 cubic yard
Spreading width...........	5 to 40'	5 to 40 ft.
Amperage draw............	25-35 amps	25-35 amps
Spreading material.......	Capable of spreading most granular bulk material, including coarse 50/50 sand/ salt mix	Capable of spreading most granular bulk material, including coarse 50/50 sand/ salt mix
Electrical	SP-6000	SP-8000
Speed Control..............	Dual independent auger/ spinner speed flow control system LED display with digital system status and circuit protection	Dual independent auger/ spinner speed flow control system LED display with digital system status and circuit protection
Wiring Harness.............	Constructed with GXL high temp 10 gauge automotive wire with non-combustible sheathing	Constructed with GXL high temp 10 gauge automotive wire with non-combustible sheathing
Construction	SP-6000	SP-8000
Frame...........................	Unitized heavy-duty steel construction	Unitized heavy-duty steel construction
Hopper.........................	One piece LLDFE safety yellow ploy with integral vertical rib construction	One piece LLDFE safety yellow ploy with integral vertical rib construction
Motor...........................	Dual, 12-volt DC directs drive mounted in weather tight enclosure	Dual, 12-volt DC directs drive mounted in weather tight enclosure
Spinner Drive assy ..........................	Compact independent weather tight unit, with maximum speed 8:1 gear reduction transmission. Modular design for quick disconnect and storage.	Compact independent weather tight unit, with maximum speed 8:1 gear reduction transmission. Modular design for quick disconnect and storage.
Spinner...................	Heavy duty 12" multi filte steel	Heavy duty 12" multi filte steel
Auger Drive assy.......	Unique maximum torque trans with 20:1 gear reduction	Unique maximum torque trans with 20:1 gear reduction
Auger.....................	Unidirectional welded steel fliting	Unidirectional welded steel fliting
Mounting	Positive locating mount with ratchet strap assists	Positive locating mount with ratchet strap assists
Dimensions
Empty	350 lbs	400 lbs
Overall Length.......	74"	96"
Height.................	34"	34"
Width.................	48.5"	48.5"
Depth (Tapered)..	12-32"	12-32"
Standard Equipment	SP-6000	SP-8000
	Top Screen, Fitted Tarp, Vibrator to assist moving material, Inverted Vee to maximize material flow, Brake light	Top Screen, Fitted Tarp, Vibrator to assist moving material, Inverted Vee to maximize material flow, Brake light
Optional Equipment	SP-6000	SP-8000
	Light Kit, Mobile Storage Kit with wheeled base for easy vertical off-season	Light Kit, Mobile storage Kit with wheeled base for easy vertical off-season

Snowex Pivot Pro 1075

Pivot Pro 1075

The Pivot Pro gets its name from its optional pivot mount that allows full tailgate access without removing the spreader and requires no drilling of holes to install. Equipped with a pivot mount option, Pivot-Pro 1075 Tailgate Spreader from SnowEx, is designed for use by large and small snow and ice control contractors. The unit accommodates salt, sand, and deicing materials. Its pivot mount requires no drill holes in the truck bed and swings to provide full tailgate or rear door access. A 2-inch receiver hitch mount is standard and a three-point mount is offered. Mounted in a weather-tight enclosure, the system includes a 12-volt DC motor and maximum torque transmission.

SP 1075 Specifications
empty weight	146 lbs.
dimensions	41" x 47" x 23.5 "
capacity	10.75 cu. ft./ 700 lbs.
spreading width	4 to 40 ft.
amp draw	12 to 15 amps
spreading material	dry, free-flowing material (salt, deicers, etc.)
controller	variable speed digital w/ blast feature
mounting	pivot mount optional, receiver hitch mount optional
other options and accessories	adjustable deflector, top screen, gate assembly kit, light kit, vibrator kit

Snowex Mini Pro 575

Mini Pro 575

This revolutionary spreader can hold up to 5.75 cu. ft. or 350 lbs. of material and features a variable-speed dial controller. The Mini Pro is recommended for utility work vehicles, compact pickup trucks, SUVs, 1/2 ton pickup trucks, and midsize tractors.

SP 575 / LG 575 Specifications
empty weight	106 lbs.
dimensions	32.5" x 38.5" x 18.5"
capacity	5.75 cu. ft./ 350 lbs.
spreading width	4 to 40 ft.
amp draw	12 to 15 amps
spreading material	dry, free-flowing material (salt, deicers, etc.)
controller	variable speed digital w/ blast feature
standard features	receiver hitch mount
other options and accessories	top screen, light kit, gate assembly kit, adjustable deflector, vibrator kit, utility mount